• Drinking water filters
  • Kitchen and drinking water taps
  • Water dispensers
  • Industrial RO systems and parts
  • UV STERILISERS AND PARTS
  • WATER TREATMENT SYSTEMS FOR PRIVATE HOMES
  • Mechanical filtration
  • CONTROL UNITS AND SPARE PARTS
  • TANKS FOR FILTER SYSTEMS
  • Filter media
  • Solenoid valves and switches
  • Generators
  • Reagents
  • Shower accessories
  • Bag filters
"Clack" control valve WS1.25 CI Regenerating - Time (Softener KMnO)
Cold control valve WS 1,25 "CI - automatic filter unit with connection diameter 1", 1,25 ". Diameter under the water pipe - 1,25". Landing thread - 2,5 ". It is supplied in two modifications: DM - reagent, BTZ - without reagents. The reagent valve Clack WS 1,25" CI (V125CI-DM) has a reagent line 3/8 "(1/2") for attaching the tank - salt solvent and is equipped with a counter for measuring purified water. Possible reagent flow up and down during washing. Clack WS 1.25 "The CI (V125CI-BTZ) valve, which does not contain reagents, is three-cycle (by default) and is used on iron removers, clarifiers and collection filters. This valve is equipped with a five-button (incremental) CI board with the maximum number of settings. It is possible to flush immediately. , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1,25 CI
Housing material: glass-filled Noryl / Noril
Connection diameter (inlet/outlet), inches: 1/1; 1,25 / 1,25
Diameter of the drain, inches: 3/4; 1
Water pipe diameter, inches: 1,25
Landing thread diameter, inches: 2,5 "
Rated water consumption, m3 / h: 7,74
Regeneration Type: Downstream / Upstream
Controller: CI (electronic, up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 187
Range of applications, inches: 6-21 - softening
6-21 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Reagent tank filling speed: 0,5 gpm (1,9 L/min)
Weight of the pilot valve, kg: 2,0 lbs (4,5 lbs)
369.00 € 369.0 EUR
"Clack" control valve WS1.25 EI Filter - Meter (Backwash only)
Clack WS control valve 1,25 "EI - automatic equipment for filters with connection diameter 1", 1,25 ". Water pipe diameter - 32 mm. Armature - 2,5". It is supplied in two modifications: DM - reagent and BTZ - without reagents. Reagent valve Clack WS 1,25 "EI (V125EI-DM) is with reagent line 3/8" (1/2 ") to connect the salt-solvent tank, and is equipped with a counter for measuring the purified water. Up and down flow of reagent is possible during flushing. Reagent without valve. Clack WS 1,25 "EI (V125EI-BTZ) is three-cycle (by default) and is used in defrosters, clarifiers and filter manifolds. This valve is equipped with a four-button EI panel. With the transition to the next stage of regeneration, an immediate rinsing is possible. The board has connectors for connecting the meter, MAV and NHWB valves.

Manufacturer: Clack Corporation
Model: Clack WS 1,25 EI
Housing material: glass-filled Noryl / Noril
Connection diameter (inlet/outlet), inches: 1/1; 1,25 / 1,25
Diameter of the drain, inches: 3/4; 1
Water pipe diameter, inches: 1,25
Landing thread diameter, inches: 2,5 "
Rated water consumption, m3 / h: 7,74
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 187
Range of applications, inches: 6-21 - softening
6-21 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Reagent tank filling speed: 0,5 gpm (1,9 L/min)
Weight of the pilot valve, kg: 2,0 lbs (4,5 lbs)
358.99 € 358.99 EUR
"Clack" control valve WS1.25 EI Filter - Time (Backwash only)
Clack WS control valve 1,25 "EI - automatic equipment for filters with connection diameter 1", 1,25 ". Water pipe diameter - 32 mm. Armature - 2,5". It is supplied in two modifications: DM - reagent and BTZ - without reagents. Reagent valve Clack WS 1,25 "EI (V125EI-DM) is with reagent line 3/8" (1/2 ") to connect the salt-solvent tank, and is equipped with a counter for measuring the purified water. Up and down flow of reagent is possible during flushing. Reagent without valve. Clack WS 1,25 "EI (V125EI-BTZ) is three-cycle (by default) and is used in defrosters, clarifiers and filter manifolds. This valve is equipped with a four-button EI panel. With the transition to the next stage of regeneration, an immediate rinsing is possible. The board has connectors for connecting the meter, MAV and NHWB valves.

Manufacturer: Clack Corporation
Model: Clack WS 1,25 EI
Housing material: glass-filled Noryl / Noril
Connection diameter (inlet/outlet), inches: 1/1; 1,25 / 1,25
Diameter of the drain, inches: 3/4; 1
Water pipe diameter, inches: 1,25
Landing thread diameter, inches: 2,5 "
Rated water consumption, m3 / h: 7,74
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 187
Range of applications, inches: 6-21 - softening
6-21 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Reagent tank filling speed: 0,5 gpm (1,9 L/min)
Weight of the pilot valve, kg: 2,0 lbs (4,5 lbs)
351.00 € 351.0 EUR
"Clack" control valve WS1.25 EI Regenerating - Meter (Softener KMnO)
Clack WS control valve 1,25 "EI - automatic equipment for filters with connection diameter 1", 1,25 ". Water pipe diameter - 32 mm. Armature - 2,5". It is supplied in two modifications: DM - reagent and BTZ - without reagents. Reagent valve Clack WS 1,25 "EI (V125EI-DM) is with reagent line 3/8" (1/2 ") to connect the salt-solvent tank, and is equipped with a counter for measuring the purified water. Up and down flow of reagent is possible during flushing. Reagent without valve. Clack WS 1,25 "EI (V125EI-BTZ) is three-cycle (by default) and is used in defrosters, clarifiers and filter manifolds. This valve is equipped with a four-button EI panel. With the transition to the next stage of regeneration, an immediate rinsing is possible. The board has connectors for connecting the meter, MAV and NHWB valves.

Manufacturer: Clack Corporation
Model: Clack WS 1,25 EI
Housing material: glass-filled Noryl / Noril
Connection diameter (inlet/outlet), inches: 1/1; 1,25 / 1,25
Diameter of the drain, inches: 3/4; 1
Water pipe diameter, inches: 1,25
Landing thread diameter, inches: 2,5 "
Rated water consumption, m3 / h: 7,74
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 187
Range of applications, inches: 6-21 - softening
6-21 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Reagent tank filling speed: 0,5 gpm (1,9 L/min)
Weight of the pilot valve, kg: 2,0 lbs (4,5 lbs)
358.99 € 358.99 EUR
Clack WS1.25 EI Regenerating - Time (Softener KMnO) Control block
Clack WS control valve 1,25 "EI - automatic equipment for filters with connection diameter 1", 1,25 ". Water pipe diameter - 32 mm. Armature - 2,5". It is supplied in two modifications: DM - reagent and BTZ - without reagents. Reagent valve Clack WS 1,25 "EI (V125EI-DM) is with reagent line 3/8" (1/2 ") to connect the salt-solvent tank, and is equipped with a counter for measuring the purified water. Up and down flow of reagent is possible during flushing. Reagent without valve. Clack WS 1,25 "EI (V125EI-BTZ) is three-cycle (by default) and is used in defrosters, clarifiers and filter manifolds. This valve is equipped with a four-button EI panel. With the transition to the next stage of regeneration, an immediate rinsing is possible. The board has connectors for connecting the meter, MAV and NHWB valves.

Manufacturer: Clack Corporation
Model: Clack WS 1,25 EI
Housing material: glass-filled Noryl / Noril
Connection diameter (inlet/outlet), inches: 1/1; 1,25 / 1,25
Diameter of the drain, inches: 3/4; 1
Water pipe diameter, inches: 1,25
Landing thread diameter, inches: 2,5 "
Rated water consumption, m3 / h: 7,74
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 187
Range of applications, inches: 6-21 - softening
6-21 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Reagent tank filling speed: 0,5 gpm (1,9 L/min)
Weight of the pilot valve, kg: 2,0 lbs (4,5 lbs)
395.00 € 395.0 EUR
"Clack" control valve WS1.25 TC Filter (Backwash only)
Cold control valve WS 1.25 "TC - automatic equipment for filters with connection diameter 1", 1,25 ". Water pipe diameter - 32 mm. Armature - 2,5". It is supplied in two modifications: DT - with reagent and BTZ - without reagents. Reagent valve Clack WS 1,25 "TC (V125TC-DT) is with reagent line 3/8" or 1/2 " to add salt tank, meter flow meter is not provided. Only downward flow of reagent is possible during rinsing. Clack WS without reagent 1,25 inch TC (V125TC-BTZ) has three cycles (by default), and is used for iron removers, clarifiers and internal filters. This valve is equipped with three button TC card. Direct changes to the duration of the stages are not possible. The duration of the washing cycles is included in the programmes stored in the controller. There is a function for starting instant rinsing with the transition to the next stage of regeneration. MAV and NHWB connectors - not provided.

Manufacturer: Clack Corporation
Model: Clack WS 1.25 TC
Housing material: glass-filled Noryl / Noril
Connection diameter, inches: 1 or 1,25
Sewer diameter, inches: 3/4 or 1
Water pipe diameter, inches: 1,25
Landing thread diameter, inches: 2,5 "
Rated water consumption, m3 / h: 7,74
Regeneration type: Subordinate
Controller: TC (electronic, up to 5 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 187
Range of applications, inches: 6-21 - softening
6-21 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Reagent tank filling speed: 0,5 gpm (1,9 L/min)
Weight of the pilot valve, kg: 2,0 lbs (4,5 lbs)
285.00 € 285.0 EUR
"Clack" control valve WS1.25 TC Regenerating (Softener KMnO)
Cold control valve WS 1.25 "TC - automatic equipment for filters with connection diameter 1", 1,25 ". Water pipe diameter - 32 mm. Armature - 2,5". It is supplied in two modifications: DT - with reagent and BTZ - without reagents. Reagent valve Clack WS 1,25 "TC (V125TC-DT) is with reagent line 3/8" or 1/2 " to add salt tank, meter flow meter is not provided. Only downward flow of reagent is possible during rinsing. Clack WS without reagent 1,25 inch TC (V125TC-BTZ) has three cycles (by default), and is used for iron removers, clarifiers and internal filters. This valve is equipped with three button TC card. Direct changes to the duration of the stages are not possible. The duration of the washing cycles is included in the programmes stored in the controller. There is a function for starting instant rinsing with the transition to the next stage of regeneration. MAV and NHWB connectors - not provided.

Manufacturer: Clack Corporation
Model: Clack WS 1.25 TC
Housing material: glass-filled Noryl / Noril
Connection diameter, inches: 1 or 1,25
Sewer diameter, inches: 3/4 or 1
Water pipe diameter, inches: 1,25
Landing thread diameter, inches: 2,5 "
Rated water consumption, m3 / h: 7,74
Regeneration type: Subordinate
Controller: TC (electronic, up to 5 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 187
Range of applications, inches: 6-21 - softening
6-21 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Reagent tank filling speed: 0,5 gpm (1,9 L/min)
Weight of the pilot valve, kg: 2,0 lbs (4,5 lbs)
309.00 € 309.0 EUR
"Clack" control valve WS1.5 CI Regenerating - Time (Softener KMnO)
Number of cycles: up to 6
Valve Material: Noryl (1) or equivalent
Regeneration: downflow
Operating pressure (max./min.) 1,4 bar – 8,6 bar
Operating temperature (max./min.) 4C – 43C
Electrical specifications (AC adapter)

Supply Voltage: 230 V AC
Supply Frequency: 50 Hz
Output Voltage: 12 V AC
Output Current: 500 mA
899.01 € 899.01 EUR
"Clack" control valve WS1.5 EI Filter - Meter (Backwash only)
Clack WS 1,5 "EI control valve - automatic equipment for filters with 1,5" connection diameter. Diameter under the water pipe - 2 ". Landing thread - 4". It is supplied in two modifications: DM - reagent, BTZ - without reagents. The reagent valve Clack WS 1,5 "EI (V15EI-DM) has a 1/2" reagent line for adding salt-solvent tank, and is equipped with a counter for measuring purified water. Possible reagent flow up and down during washing. Clack WS 1,5 "EI (V15EI-BTZ) reagent-free valve is three-cycle (default), and is used for the use of separators, clarification devices and collection filters. This valve is equipped with a five-button (step) CI card with the maximum number of settings. It is possible to flush immediately. , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 1,5/1,5 female round NPT
Sewer diameter, inches: 1,25 ”NPT with 3/4” standard NPT, 1 ”NPT optional
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 191
Range of applications, inches: 12-30 - softening
12-30 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 9,3 kg
1,299.00 € 1299.0 EUR
"Clack" control valve WS1.5 EI Filter - Meter (Backwash only)
Clack WS 1,5 "EI control valve - automatic equipment for filters with 1,5" connection diameter. Diameter under the water pipe - 2 ". Landing thread - 4". It is supplied in two modifications: DM - reagent, BTZ - without reagents. The reagent valve Clack WS 1,5 "EI (V15EI-DM) has a 1/2" reagent line for adding salt-solvent tank, and is equipped with a counter for measuring purified water. Possible reagent flow up and down during washing. Clack WS 1,5 "EI (V15EI-BTZ) reagent-free valve is three-cycle (default), and is used for the use of separators, clarification devices and collection filters. This valve is equipped with a five-button (step) CI card with the maximum number of settings. It is possible to flush immediately. , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 1,5/1,5 female round NPT
Sewer diameter, inches: 1,25 ”NPT with 3/4” standard NPT, 1 ”NPT optional
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 191
Range of applications, inches: 12-30 - softening
12-30 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 9,3 kg
1,299.00 € 1299.0 EUR
"Clack" control valve WS1.5 EI Filter - Time (Softener KMnO)
Clack WS 1,5 "EI control valve - automatic equipment for filters with 1,5" connection diameter. Diameter under the water pipe - 2 ". Landing thread - 4". It is supplied in two modifications: DM - reagent, BTZ - without reagents. The reagent valve Clack WS 1,5 "EI (V15EI-DM) has a 1/2" reagent line for adding salt-solvent tank, and is equipped with a counter for measuring purified water. Possible reagent flow up and down during washing. Clack WS 1,5 "EI (V15EI-BTZ) reagent-free valve is three-cycle (default), and is used for the use of separators, clarification devices and collection filters. This valve is equipped with a five-button (step) CI card with the maximum number of settings. It is possible to flush immediately. , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 1,5/1,5 female round NPT
Sewer diameter, inches: 1,25 ”NPT with 3/4” standard NPT, 1 ”NPT optional
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 191
Range of applications, inches: 12-30 - softening
12-30 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 9,3 kg
879.00 € 879.0 EUR
Clack WS1.5 EI Filter - Time (Softener KMnO) Control Unit
Clack WS 1,5 "EI control valve - automatic equipment for filters with a connection diameter of 1,5". Diameter under the water pipe - 2 ". Cargo cut - 4". It has two versions: DM - reagent, BTZ - without reagent. Clack WS 1,5 "EI (V15EI-DM) reagent valve has 1/2" reagent line to add salt-solvent tank, and is equipped with purified water meter. Reagent flow up and down during washing is possible. Clack WS 1,5 "EI (V15EI-BTZ) reagent-free valve is a three-way valve (by default) and is used for separators, clarifiers and manifold filters. This valve is equipped with a five-button (degree) CI card with maximum limit. You can immediately rinse, moving to the next stage of regeneration. The board has connectors for meters, MAV and NHWB valves, and relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body material: brass / bronze
Connection diameter (inlet/outlet), inches: 1,5/1,5, internal NPT
Sewer diameter, inches: 1,25 ”NPT, 3/4” standard NPT, 1 ”NPT, optional
Water pipe diameter: 1,90" outer pipe, 1,5" NPS
Shore diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gallons per minute - 263 l / min)
Regeneration type: descending / ascending
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent stability: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 191
Range of applicable coatings, inches: 12-30 - softening
12-30 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4 - 8,27
Weight of the control valve, kg: 9,3 kg
879.00 € 879.0 EUR
"Clack" control valve WS1.5 EI Regenerating - Meter (Softener KMnO)
Clack WS 1,5 "EI control valve - automatic equipment for filters with 1,5" connection diameter. Diameter under the water pipe - 2 ". Landing thread - 4". It is supplied in two modifications: DM - reagent, BTZ - without reagents. The reagent valve Clack WS 1,5 "EI (V15EI-DM) has a 1/2" reagent line for adding salt-solvent tank, and is equipped with a counter for measuring purified water. Possible reagent flow up and down during washing. Clack WS 1,5 "EI (V15EI-BTZ) reagent-free valve is three-cycle (default), and is used for the use of separators, clarification devices and collection filters. This valve is equipped with a five-button (step) CI card with the maximum number of settings. It is possible to flush immediately. , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 1,5/1,5 female round NPT
Sewer diameter, inches: 1,25 ”NPT with 3/4” standard NPT, 1 ”NPT optional
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 191
Range of applications, inches: 12-30 - softening
12-30 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 9,3 kg
1,299.00 € 1299.0 EUR
"Clack" control valve WS1.5 EI Regenerating - Time (Softener KMnO)
Clack WS 1,5 "EI control valve - automatic equipment for filters with 1,5" connection diameter. Diameter under the water pipe - 2 ". Landing thread - 4". It is supplied in two modifications: DM - reagent, BTZ - without reagents. The reagent valve Clack WS 1,5 "EI (V15EI-DM) has a 1/2" reagent line for adding salt-solvent tank, and is equipped with a counter for measuring purified water. Possible reagent flow up and down during washing. Clack WS 1,5 "EI (V15EI-BTZ) reagent-free valve is three-cycle (default), and is used for the use of separators, clarification devices and collection filters. This valve is equipped with a five-button (step) CI card with the maximum number of settings. It is possible to flush immediately. , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 1,5/1,5 female round NPT
Sewer diameter, inches: 1,25 ”NPT with 3/4” standard NPT, 1 ”NPT optional
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 191
Range of applications, inches: 12-30 - softening
12-30 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 9,3 kg
970.00 € 970.0 EUR
"Clack" control valve WS1.5 TC Filter (Backwash only)
Clack WS 1.5 TC control valve is used to regulate and control the sorption cleaning, delay, manganese and nitrate removal in charged water filters.

Pipe Connection Size (Inlet/Outlet): 1½ inches
Drain connection size: 1¼ inches
Number of regeneration cycles: up to 6
Mounting base: 4 inches
Working pressure: 1,4-8,6 atm.

Operating temperature: 4-43 °C
Power supply voltage of adapters: 220 V, 50 Hz
Control box supply voltage: 12 V
Power Consumption: 500 mA
850.00 € 850.0 EUR
WS2 CI Filter - Meter (Backwash only) Control unit
Clack WS 2 "CI valve is the analogue of Fleck 3150 and has high performance. It is equipped with a CI controller in which all regeneration stages can be programmed. The variant of the softener valve is equipped with a counter for the water discharged through the valve. The regeneration output of softeners occurs through the flow meter, filters - on the timer. The diameter of the valve landing thread - 4 ". The diameter of the plug connector is 2 ". The valve location in the filter housing is the highest. Installation with Clack WS 2" CI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.

Manufacturer: Clack Corporation
Model: Clack WS 2 CI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: CI (electronic, up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of applications, inches: 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg
1,799.00 € 1799.0 EUR
Clack WS2 CI Regenerating - Meter (Softener KMnO) Control unit
Clack WS 2 "CI valve is the analogue of Fleck 3150 and has high performance. It is equipped with a CI controller in which all regeneration stages can be programmed. The variant of the softener valve is equipped with a counter for the water discharged through the valve. The regeneration output of softeners occurs through the flow meter, filters - on the timer. The diameter of the valve landing thread - 4 ". The diameter of the plug connector is 2 ". The valve location in the filter housing is the highest. Installation with Clack WS 2" CI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.

Manufacturer: Clack Corporation
Model: Clack WS 2 CI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: CI (electronic, up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of applications, inches: 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg
2,150.00 € 2150.0 EUR
Clack WS2 CI Regenerating - Time (Backwash only) Control unit
Clack WS 2 "CI valve is the analogue of Fleck 3150 and has high performance. It is equipped with a CI controller in which all regeneration stages can be programmed. The variant of the softener valve is equipped with a counter for the water discharged through the valve. The regeneration output of softeners occurs through the flow meter, filters - on the timer. The diameter of the valve landing thread - 4 ". The diameter of the plug connector is 2 ". The valve location in the filter housing is the highest. Installation with Clack WS 2" CI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.

Manufacturer: Clack Corporation
Model: Clack WS 2 CI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: CI (electronic, up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of applications, inches: 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg
1,315.00 € 1315.0 EUR

Drinking Water Filters