• Drinking water filters
  • Kitchen and drinking water taps
  • Water dispensers
  • Industrial RO systems and parts
  • UV STERILISERS AND PARTS
  • WATER TREATMENT SYSTEMS FOR PRIVATE HOMES
  • Mechanical filtration
  • CONTROL UNITS AND SPARE PARTS
  • TANKS FOR FILTER SYSTEMS
  • Filter media
  • Solenoid valves and switches
  • Generators
  • Reagents
  • Shower accessories
  • Bag filters
19.00 € 19.0 EUR
40.00 € 40.0 EUR
54.99 € 54.99 EUR
52.01 € 52.01 EUR
185.00 € 185.0 EUR
70.00 € 70.0 EUR
365.00 € 365.0 EUR
129.00 € 129.0 EUR
320.00 € 320.0 EUR
CLACK WS1TC Control Unit (TIME CLOCK ONLY)
The control valve Clack WS 1 TC is automatic for filters with a connection diameter of 1 ". The diameter under the water pipe is 1,05". Landing thread - 2,5 ". It is supplied in two modifications: DT - with reagent and BTZ - without reagents. For reagent valve Clack WS 1" TC (V1TC-DT) has reagent line 3/8 to add salt dilution tank, to add flow meter - not provided. Only downward flow of reagent is possible during rinsing. Clack WS 1 "TC valveless valve (V1TC-BTZ) is a three-cycle valve (default) and is used for separator, clarification and filter filters. This valve is equipped with three button TC card. A direct change of the duration of the stages is not possible. The duration of the wash cycles is stored in the controller. There is a function for starting immediate flushing with the transition to the next stage of regeneration: MAV and NHWB connectors - not provided.

Inlet/Outlet Fittings: ¾" to 1.5” NPS
Number of cycles: up to 6
Valve Material: Noryl (1) or equivalent
Regeneration: downflow
Operating pressure (max./min.) 1,4 bar – 8,6 bar
Operating temperature (max./min.) 4C – 43C
Electrical specifications (AC adapter)

Supply Voltage: 230 V AC
Supply Frequency: 50 Hz
Output Voltage: 12 V AC
Output Current: 500 mA
229.00 € 229.0 EUR
Control valve CLACK WS 2H (V2H-BTZ)
Clack WS 2H no-reaction control valve (V2H-BTZ) is an automatic device for high-performance three-cycle backflow-only flushing filter. Exit to regeneration - with a timer. It is possible to start manual regeneration (as with every Clack controller). Valve seat in the filter housing - top / side. The diameter of the water pipe (distributor) is 63 mm. The salt line diameter is not specified. The drainage line is 2 ". The mode of operation is periodic.

Manufacturer: Clack Corporation
Model: Clack WS 2H BTZ
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2” internal BSPT or NPT/2,5” groove Lock
Sewer diameter, inches: 2” female NPT or BSPT 2,5” groove wrench
Standing pipe diameter, inches: 63 mm O.D. or 2.375 ”O.D. Pipe
Landing thread diameter, inches: Quick Disconnect, 4 ”- 8 AND, 6” Flange, Side mounting
Rated water flow rate, m3 / h: 473 lpm, 28,4 m3 / h
Regeneration type: Up
Controller: electronic (up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chloramines
Housing height from the top of the filter housing, mm: with 4 ”- 8 AND QC base is 292 mm
with 6’s flange QC base is 294,6 mm
Range of applications, inches: 18 - 63 - softening / 18 - 48 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature range, degrees Celsius: 4 - 43
Operating pressure, bar: 1,4 - 8,27
Weight of the control valve, kg: 22,7 Kg
2,850.00 € 2850.0 EUR
Control valve CLACK WS 3 (V3-BTZ)
CLACK WS3 (V3-BTZ)

Clack WS3 Reagent-free control valve (V3-BTZ) is an automatic device for high-performance three-cycle backflow-only flushing filter. Exit to regeneration - with a timer. It is possible to start manual regeneration (as with every Clack controller). The location of the valve on the filter housing is at the top / side. The size of the water pipe (distributor) is 3 ". The size of the salt line is not specified. The sewer pipe is 3". The mode of operation is periodic.

Manufacturer: Clack Corporation
Model: Clack WS 3 BTZ
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 3” female BSPT or NPT
Drain diameter, inches: 3” female round NPT or BSPT
Standing pipe diameter, inches: 90 mm or 3,5” O.D. Pipes 3 ”NPS
Bore diameter, inches: Quick disconnect, 6” flange, side mounting
Rated water flow rate, m3 / h: 946 lpm, 56,8 m3 / h
Regeneration type: Up
Controller: electronic (up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chloramines
Housing height from the top of the filter housing, mm: with 6 inch flange QC base is 318 mm
Range of applications, inches: 18 - 96 - softening / 18 - 63 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature range, degrees Celsius: 4 - 43
Operating pressure, bar: 1,4 - 8,27
Weight of the control valve, kg: 25,9
3,350.01 € 3350.01 EUR
Control valve Clack WS 2H (V2H-DM)
Cold control valve WS 2H high performance valve. Clack Corporation new line. The valve is used in softening / filtering plants. The valve is equipped with V3242-01 BOARD controller. It has a remote control that allows you to easily configure and diagnose the valve. It is possible to program all regeneration stages. The valve is made of bronze. The connection diameter is 2 ". The valve mount is on the top/side. The thread diameter is 4". The diameter of the water pipe (distributor) is 63 mm.

Manufacturer: Clack Corporation
Model: Clack WS 2H
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2” internal BSPT or NPT/2,5” groove Lock
Sewer diameter, inches: 2” female NPT or BSPT 2,5” groove wrench
Standing pipe diameter, inches: 63 mm O.D. or 2.375 ”O.D. Pipe
Landing thread diameter, inches: Quick Disconnect, 4 ”- 8 AND, 6” Flange, Side mounting
Rated water flow rate, m3 / h: 473 lpm, 28,4 m3 / h
Regeneration type: Up
Controller: electronic (up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chloramines
Housing height from the top of the filter housing, mm: with 4 ”- 8 AND QC base is 292 mm
with 6’s flange QC base is 294,6 mm
Range of suitable cases, inches: 18 - 63 - softening /
18 - 48 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4 - 8,27
Weight of the control valve, kg: 22,7 Kg
2,859.99 € 2859.9900000000002 EUR
Clack WS3 Control Unit ( V3-DT)
CLACK WS3 (V3-DT)

Reagent control valve Clack WS 3 (V3-DT) - automation for high performance softener. The regeneration output can be configured in different ways - instant flow rate, delayed flow rate and timer. It is possible to start manual regeneration (as with every Clack controller). The flow direction during regeneration is downward. Valve seat in the filter housing - top / side. The size of the water pipe (distributor) is 90 mm. The diameter of the salt line is 1 ". The sewer line is 3".

Manufacturer: Clack Corporation
Model: Clack WS 3 DT
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 3” female BSPT or NPT
Drain diameter, inches: 3” female round NPT or BSPT
Standing pipe diameter, inches: 90 mm or 3,5” O.D. Pipes 3 ”NPS
Bore diameter, inches: Quick disconnect, 6” flange, side mounting
Rated water flow rate, m3 / h: 946 lpm, 56,8 m3 / h
Regeneration type: Up
Controller: electronic (up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chloramines
Housing height from the top of the filter housing, mm: with 6 inch flange QC base is 318 mm
Range of applications, inches: 18-96 - softening / 18-63 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 25,9
3,390.00 € 3390.0 EUR
"Clack" control valve WS1.25 CI Filter - Meter (Backwash only)
Cold control valve WS 1,25 "CI - automatic filter unit with connection diameter 1", 1,25 ". Diameter under the water pipe - 1,25". Landing thread - 2,5 ". It is supplied in two modifications: DM - reagent, BTZ - without reagents. The reagent valve Clack WS 1,25" CI (V125CI-DM) has a reagent line 3/8 "(1/2") for attaching the tank - salt solvent and is equipped with a counter for measuring purified water. Possible reagent flow up and down during washing. Clack WS 1.25 "The CI (V125CI-BTZ) valve, which does not contain reagents, is three-cycle (by default) and is used on iron removers, clarifiers and collection filters. This valve is equipped with a five-button (incremental) CI board with the maximum number of settings. It is possible to flush immediately. , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1,25 CI
Housing material: glass-filled Noryl / Noril
Connection diameter (inlet/outlet), inches: 1/1; 1,25 / 1,25
Diameter of the drain, inches: 3/4; 1
Water pipe diameter, inches: 1,25
Landing thread diameter, inches: 2,5 "
Rated water consumption, m3 / h: 7,74
Regeneration Type: Downstream / Upstream
Controller: CI (electronic, up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 187
Range of applications, inches: 6-21 - softening
6-21 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Reagent tank filling speed: 0,5 gpm (1,9 L/min)
Weight of the pilot valve, kg: 2,0 lbs (4,5 lbs)
369.00 € 369.0 EUR
"Clack" control valve WS1.25 CI Filter - Time (Backwash only)
Cold control valve WS 1,25 "CI - automatic filter unit with connection diameter 1", 1,25 ". Diameter under the water pipe - 1,25". Landing thread - 2,5 ". It is supplied in two modifications: DM - reagent, BTZ - without reagents. The reagent valve Clack WS 1,25" CI (V125CI-DM) has a reagent line 3/8 "(1/2") for attaching the tank - salt solvent and is equipped with a counter for measuring purified water. Possible reagent flow up and down during washing. Clack WS 1.25 "The CI (V125CI-BTZ) valve, which does not contain reagents, is three-cycle (by default) and is used on iron removers, clarifiers and collection filters. This valve is equipped with a five-button (incremental) CI board with the maximum number of settings. It is possible to flush immediately. , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1,25 CI
Housing material: glass-filled Noryl / Noril
Connection diameter (inlet/outlet), inches: 1/1; 1,25 / 1,25
Diameter of the drain, inches: 3/4; 1
Water pipe diameter, inches: 1,25
Landing thread diameter, inches: 2,5 "
Rated water consumption, m3 / h: 7,74
Regeneration Type: Downstream / Upstream
Controller: CI (electronic, up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 187
Range of applications, inches: 6-21 - softening
6-21 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Reagent tank filling speed: 0,5 gpm (1,9 L/min)
Weight of the pilot valve, kg: 2,0 lbs (4,5 lbs)
369.00 € 369.0 EUR
"Clack" control valve WS1.25 CI Regenerating - Meter (Softener KMnO)
Number of cycles: up to 6
Valve Material: Noryl (1) or equivalent
Regeneration: downflow
Operating pressure (max./min.) 1,4 bar – 8,6 bar
Operating temperature (max./min.) 4C – 43C
Electrical specifications (AC adapter)

Supply Voltage: 230 V AC
Supply Frequency: 50 Hz
Output Voltage: 12 V AC
Output Current: 500 mA
369.00 € 369.0 EUR

Drinking Water Filters