• WATER TREATMENT SYSTEMS FOR PRIVATE HOMES
''Clack'' control valve WS1CI TWIN CONTROL VALVES
Clack WS1 CI automatic control valve (set) is designed for water softening systems.
The best option with an electronic water meter integrated in the control unit allows you to qualitatively soften water, automatically selects without error the period of regeneration of ion-exchange resins, saves salt tablets.
The control box of Clack WS1 CI is made of high strength plastic. Provides operating pressure up to 8,6 atmospheres. The maximum performance of a single filter is limited by the 1 "bandwidth.
If you choose a control unit for your water softener, the Clack WS1CI control valve is the best solution so far. The quality of the products of the global manufacturer Clack Corporation is beyond doubt.




Supply Voltage: 230 V AC
Supply Frequency: 50 Hz
Output Voltage: 12 V AC
Output Current: 500 mA
659.00 € 659.0 EUR
DWS 9 water softener
DWS 9 effectively softens water and reduces iron, manganese and ammonium content, providing quality and safe water for daily use. The device helps to prevent limescale deposits on plumbing and household appliances, prolongs the service life of equipment and improves the taste of water.
Diamond Water Services uses only high quality and proven components, ensuring reliable and long-term efficient operation.
The filter is intended for cottages, private houses, etc. with water consumption up to 10 m³ per month, where the iron content in the water does not exceed 2.5 mg/l.
The unit is equipped with Clack WS1 control unit, which ensures fully automatic system operation – purification and regeneration after actual water consumption. This allows you to optimize salt and water consumption, reducing operating costs.
The regeneration is done with salt tablets (NaCl), which is a simple, convenient and economical solution for daily use.
NB!
1. The filter does not reduce the organic matter content in the water (permanganate index). If this value is higher, we recommend choosing a DWA series filter or contact our customer consultant to find the most appropriate solution.
2. The filter does not remove hydrogen sulphide (rotten egg-like) odor. If this is the case, we recommend to choose one of the DWI or DWC series, or contact our specialists for individual consultation.
695.21 € 695.21 EUR
DWS 10 water softener
DWS1054 effectively softens water and reduces iron, manganese and ammonium content, providing quality and safe water for daily use. The device helps to prevent limescale deposits on plumbing and household appliances, prolongs the service life of equipment and improves the taste of water.
Diamond Water Services uses only high quality and proven components, ensuring reliable and long-term efficient operation.
The filter is intended for cottages, private houses, etc. with water consumption up to 15 m³ per month, where the iron content in the water does not exceed 2.5 mg/l.
The unit is equipped with Clack WS1 control unit, which ensures fully automatic system operation – purification and regeneration after actual water consumption. This allows you to optimize salt and water consumption, reducing operating costs.
The regeneration is done with salt tablets (NaCl), which is a simple, convenient and economical solution for daily use.
NB!
1. The filter does not reduce the organic matter content in the water (permanganate index). If this value is higher, we recommend choosing a DWA series filter or contact our customer consultant to find the most appropriate solution.
2. The filter does not remove hydrogen sulphide (rotten egg-like) odor. If this is the case, we recommend to choose one of the DWI or DWC series, or contact our specialists for individual consultation
757.63 € 757.63 EUR
DWS 12 water softening equipment
DWS 12 effectively softens water and reduces iron, manganese and ammonium content, providing quality and safe water for daily use. The device helps to prevent limescale deposits on plumbing and household appliances, prolongs the service life of equipment and improves the taste of water.
Diamond Water Services uses only high quality and proven components, ensuring reliable and long-term efficient operation.
The filter is intended for cottages, private houses, etc. with water consumption up to 20 m³ per month, where the iron content in the water does not exceed 2.5 mg/l.
The unit is equipped with Clack WS1 control unit, which ensures fully automatic system operation – purification and regeneration after actual water consumption. This allows you to optimize salt and water consumption, reducing operating costs.
The regeneration is done with salt tablets (NaCl), which is a simple, convenient and economical solution for daily use.
NB!
1. The filter does not reduce the organic matter content in the water (permanganate index). If this value is higher, we recommend choosing a DWA series filter or contact our customer consultant to find the most appropriate solution.
2. The filter does not remove hydrogen sulphide (rotten egg-like) odor. If this is the case, we recommend to choose one of the DWI or DWC series, or contact our specialists for individual consultation.
841.23 € 841.23 EUR
DWS 13 water softener
DWS 13 effectively softens water and reduces iron, manganese and ammonium content, providing quality and safe water for daily use. The device helps to prevent limescale deposits on plumbing and household appliances, prolongs the service life of equipment and improves the taste of water.
Diamond Water Services uses only high quality and proven components, ensuring reliable and long-term efficient operation.
The filter is intended for cottages, private houses, etc. with water consumption up to 25 m³ per month, where the iron content in the water does not exceed 2.5 mg/l.
The unit is equipped with Clack WS1 control unit, which ensures fully automatic system operation – purification and regeneration after actual water consumption. This allows you to optimize salt and water consumption, reducing operating costs.
The regeneration is done with salt tablets (NaCl), which is a simple, convenient and economical solution for daily use.
NB!
1. The filter does not reduce the organic matter content in the water (permanganate index). If this value is higher, we recommend choosing a DWA series filter or contact our customer consultant to find the most appropriate solution.
2. The filter does not remove hydrogen sulphide (rotten egg-like) odor. If this is the case, we recommend to choose one of the DWI or DWC series, or contact our specialists for individual consultation.
924.83 € 924.83 EUR
DWI 10 water iron removal system
DWS series DWI 10 is a reagent-free water iron removal unit designed for efficient drinking and domestic water treatment for private homes, cottages and commercial buildings.

The main advantages:
🔹 Effectively cleans water from three main problems – removes iron, manganese and unpleasant hydrogen sulphide (rotten egg) odor.
🔹 Reagent-free technology – no salt or chemicals are used for system flushing, only water and air.
🔹 Fully automatic operation – premium US control unit Clack WS1CI ensures automatic rinsing according to actual water consumption.
🔹 Protects plumbing and household appliances – reduces the formation of iron deposits, protecting boilers, washing machines, faucets and other devices from clogging and premature wear.

How does the machine work?
The water first passes through the aeration chamber, where, in contact with air, the iron and manganese oxidize and turn into solid particles. They are then effectively retained by the multi-layer filtering filler (Manganox and quartz sand), ensuring clean, clear and quality water.

Technical Specification:
• Rated output (flow): 0.6 m³/h
• Maximum yield: 3.0 m³/h
• Water consumption per rinse: ~160 litres
• Minimum flushing flow: 1.6 m³ (27.0 l/min)
• Dimensions (Diameter x Height): 250 × 570 mm
• Weight (empty unit): 71 kg
• Connection dimensions: Inlet/Exhaust: 1", Drainage: 3/4"

General technical characteristics and water quality limits
• Control box: automatic Clack WS1CI 1" (US).
• Filling type: Manganox catalytic filter material, quartz sand of various fractions.
• Tank material: composite material – PE with fiberglass sheath.
• Power supply voltage: 220 V / 50 Hz (with 24 V adapter), power -10 W.
• Operating pressure: 2.0 – 3.5 bar (maximum pressure up to 10 bar).

Water quality limit values for treatment:
• Oxidized iron (Fe³⁺): max. 15 000 µg/l
• Dissolved iron (Fe²⁺): max. 3 000 µg/l
• Manganese (Mn²⁺): max. 100 µg/l
• Hydrogen sulfide (H₂S): max. 5 mg/l
• Permissible pH level (for iron removal): 6.8 – 9.0
• Permissible pH level (for manganese removal): 8.0 – 9.0
754.80 € 754.8000000000001 EUR
DWI 12 water iron removal system
DWS series DWI 12 is a reagent-free water iron removal unit designed for efficient drinking and domestic water treatment for private homes, cottages and commercial buildings.

The main advantages:
🔹 Effectively cleans water from three main problems – removes iron, manganese and unpleasant hydrogen sulphide (rotten egg) odor.
🔹 Reagent-free technology – no salt or chemicals are used for system flushing, only water and air.
🔹 Fully automatic operation – premium US control unit Clack WS1CI ensures automatic rinsing according to actual water consumption.
🔹 Protects plumbing and household appliances – reduces the formation of iron deposits, protecting boilers, washing machines, faucets and other devices from clogging and premature wear.

How does the machine work?
The water first passes through the aeration chamber, where, in contact with air, the iron and manganese oxidize and turn into solid particles. They are then effectively retained by the multi-layer filtering filler (Manganox and quartz sand), ensuring clean, clear and quality water.

Technical Specification:
• Rated output (flow): 0.9 m³/h
• Maximum yield: 4.0 m³/h
• Water consumption per rinse: ~220 litres
• Minimum flushing flow: 2.0 m³ (33.0 l/min)
• Dimensions (Diameter x Height): 300 × 1520 mm
• Weight (empty unit): 105 kg
• Connection dimensions: Inlet/Exhaust: 1", Drainage: 3/4"

General technical characteristics and water quality limits
• Control box: automatic Clack WS1CI 1" (US).
• Filling type: Manganox catalytic filter material, quartz sand of various fractions.
• Tank material: Composite material – PE with fiberglass sheath.
• Power supply voltage: 220 V / 50 Hz (with 24 V adapter), power -10 W.
• Operating pressure: 2.0 – 3.5 bar (maximum pressure up to 10 bar).

Water quality limit values for treatment:
• Oxidized iron (Fe³⁺): max. 15 000 µg/l
• Dissolved iron (Fe²⁺): max. 3 000 µg/l
• Manganese (Mn²⁺): max. 100 µg/l
• Hydrogen sulfide (H₂S): max. 5 mg/l
• Permissible pH level (for iron removal): 6.8 – 9.0
• Permissible pH level (for manganese removal): 8.0 – 9.0
828.25 € 828.25 EUR
DWI 13 water iron removal system
DWS series DWI 13 is a reagent-free water iron removal unit designed for efficient drinking and domestic water treatment for private homes, cottages and commercial buildings.

The main advantages:
🔹 Effectively cleans water from three main problems – removes iron, manganese and unpleasant hydrogen sulphide (rotten egg) odor.
🔹 Reagent-free technology – no salt or chemicals are used for system flushing, only water and air.
🔹 Fully automatic operation – premium US control unit Clack WS1CI ensures automatic rinsing according to actual water consumption.
🔹 Protects plumbing and household appliances – reduces the formation of iron deposits, protecting boilers, washing machines, faucets and other devices from clogging and premature wear.

How does the machine work?
The water first passes through the aeration chamber, where, in contact with air, the iron and manganese oxidize and turn into solid particles. They are then effectively retained by the multi-layer filtering filler (Manganox and quartz sand), ensuring clean, clear and quality water.

Technical Specification:
• Rated output (flow): 1.0 m³/h
• Maximum yield: 5.0 m³/h
• Water consumption per rinse: ~270 litres
• Minimum flushing flow: 2.6 m³ (43.0 l/min)
• Dimensions (Diameter x Height): 330 × 1570 mm
• Weight (empty unit): 125 kg
• Connection dimensions: Inlet/Exhaust: 1", Drainage: 3/4"

General technical characteristics and water quality limits
• Control box: automatic Clack WS1CI 1" (US).
• Filling type: Manganox catalytic filter material, quartz sand of various fractions.
• Tank material: Composite material – PE with fiberglass sheath.
• Power supply voltage: 220 V / 50 Hz (with 24 V adapter), power -10 W.
• Operating pressure: 2.0 – 3.5 bar (maximum pressure up to 10 bar).

Water quality limit values for treatment:
• Oxidized iron (Fe³⁺): max. 15 000 µg/l
• Dissolved iron (Fe²⁺): max. 3 000 µg/l
• Manganese (Mn²⁺): max. 100 µg/l
• Hydrogen sulfide (H₂S): max. 5 mg/l
• Permissible pH level (for iron removal): 6.8 – 9.0
• Permissible pH level (for manganese removal): 8.0 – 9.0
885.15 € 885.15 EUR
DWI 14 water iron removal system
DWS series DWI 14 is a reagent-free water iron removal unit designed for efficient drinking and domestic water treatment for private homes, cottages and commercial buildings.

The main advantages:
🔹 Effectively cleans water from three main problems – removes iron, manganese and unpleasant hydrogen sulphide (rotten egg) odor.
🔹 Reagent-free technology – no salt or chemicals are used for system flushing, only water and air.
🔹 Fully automatic operation – premium US control unit Clack WS1CI ensures automatic rinsing according to actual water consumption.
🔹 Protects plumbing and household appliances – reduces the formation of iron deposits, protecting boilers, washing machines, faucets and other devices from clogging and premature wear.

How does the machine work?
The water first passes through the aeration chamber, where, in contact with air, the iron and manganese oxidize and turn into solid particles. They are then effectively retained by the multi-layer filtering filler (Manganox and quartz sand), ensuring clean, clear and quality water.

Technical Specification:
• Rated output (flow): 1.5 m³/h
• Maximum yield: 5.0 m³/h
• Water consumption per rinse: ~400 litres
• Minimum flushing flow: 3.0 m³ (50.0 l/min)
• Dimensions (Diameter x Height): 370 × 1870 mm
• Weight (empty unit): 150 kg
• Connection dimensions: Inlet/Exhaust: 1", Drainage: 3/4"

General technical characteristics and water quality limits
• Control box: automatic Clack WS1CI 1" (US).
• Filling type: Manganox catalytic filter material, quartz sand of various fractions.
• Tank material: composite material – PE
with a fiberglass sheath.
• Power supply voltage: 220 V / 50 Hz (with 24 V adapter), power -10 W.
• Operating pressure: 2.0 – 3.5 bar (maximum pressure up to 10 bar).

Water quality limit values for treatment:
• Oxidized iron (Fe³⁺): max. 15 000 µg/l
• Dissolved iron (Fe²⁺): max. 3 000 µg/l
• Manganese (Mn²⁺): max. 100 µg/l
• Hydrogen sulfide (H₂S): max. 5 mg/l
• Permissible pH level (for iron removal): 6.8 – 9.0
• Permissible pH level (for manganese removal): 8.0 – 9.0
0.0 EUR
RDWI 10 iron and hydrogen sulphide removal filter
RDWI 10 is an automatic water filtration machine with one filtration column. It provides efficient water purification from iron, manganese and hydrogen sulphide, while the automatic control unit controls the filtration and regeneration process without constant user involvement. The main operating parameters of the system are programmed in the factory, and only the actual time needs to be set before operation.

Why choose RDWI?
🔹 Reduces iron content in water. Helps eliminate rust deposits and yellow stains on plumbing.
🔹 Reduces manganese content. Helps to improve water quality and reduce the formation of dark deposits.
🔹 Reduces hydrogen sulfide. Reduces unpleasant water odor.
🔹 Fully automatic operation. The automatic Clack control unit controls the filtration and regeneration processes.
🔹 Effective and reliable filtration. Factory-programmed operating modes ensure simple operation.

Technical Specification:
• Rated output (Qnom): 0.8 m³/h
• Water consumption per rinse: ~110 litres
• Minimum rinsing intensity: 1.6 m³/h
• Dimensions (Length × Width × Height): 1060 × 250 × 1570 mm
• Tank size: 10" × 0.25m
• Hopper capacity: 64 litres
• Filter media volume: 43 litres
• Connection dimensions: Inlet 1", Sewer 3/4"

General technical parameters:
• Cleaning capabilities: reduces iron, oxidized manganese, turbidity, unpleasant odours and discolouration.
• Filter media: MANGANOX and quartz sand of different fractions.
• Tank material: FRP (fiberglass).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
1,036.85 € 1036.85 EUR
RDWI 12 iron and hydrogen sulphide removal filter
RDWI 12 is an automatic water filtration machine with one filtration column. It provides efficient water purification from iron, manganese and hydrogen sulphide, while the automatic control unit controls the filtration and regeneration process without constant user involvement. The main operating parameters of the system are programmed in the factory, and only the actual time needs to be set before operation.

Why choose RDWI?
🔹 Reduces iron content in water. Helps eliminate rust deposits and yellow stains on plumbing.
🔹 Reduces manganese content. Helps to improve water quality and reduce the formation of dark deposits.
🔹 Reduces hydrogen sulfide. Reduces unpleasant water odor.
🔹 Fully automatic operation. The automatic Clack control unit controls the filtration and regeneration processes.
🔹 Effective and reliable filtration. Factory-programmed operating modes ensure simple operation.

Technical Specification:
• Rated output (Qnom): 1.0 m³/h
• Water consumption per rinse: ~130 litres
• Minimum rinsing intensity: 2.0 m³/h
• Dimensions (Length × Width × Height): 1210 × 300 × 1520 mm
• Tank size: 12" × 0.30m
• Hopper capacity: 85 litres
• Filter media volume: 57 litres
• Connection dimensions: Inlet 1", Sewer 3/4"

General technical parameters:
• Cleaning capabilities: reduces iron, oxidized manganese, turbidity, unpleasant odours and discolouration.
• Filter media: MANGANOX and quartz sand of different fractions.
• Tank material: FRP (fiberglass).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
1,112.75 € 1112.75 EUR
RDWI 13 iron and hydrogen sulphide removal filter
RDWI 13 is an automatic water filtration machine with one filtration column. It provides efficient water purification from iron, manganese and hydrogen sulphide, while the automatic control unit controls the filtration and regeneration process without constant user involvement. The main operating parameters of the system are programmed in the factory, and only the actual time needs to be set before operation.

Why choose RDWI?
🔹 Reduces iron content in water. Helps eliminate rust deposits and yellow stains on plumbing.
🔹 Reduces manganese content. Helps to improve water quality and reduce the formation of dark deposits.
🔹 Reduces hydrogen sulfide. Reduces unpleasant water odor.
🔹 Fully automatic operation. The automatic Clack control unit controls the filtration and regeneration processes.
🔹 Effective and reliable filtration. Factory-programmed operating modes ensure simple operation.

Technical Specification:
• Rated output (Qnom): 1.3 m³/h
• Water consumption per rinse: ~170 litres
• Minimum rinsing intensity: 2.0 m³/h
• Dimensions (Length × Width × Height): 1290 × 300 × 1570 mm
• Tank size: 13" × 0.33m
• Hopper capacity: 110 litres
• Filter media volume: 73 litres
• Connection dimensions: Inlet 1", Sewer 3/4"

General technical parameters:
• Cleaning capabilities: reduces iron, oxidized manganese, turbidity, unpleasant odours and discolouration.
• Filter media: MANGANOX and quartz sand of different fractions.
• Tank material: FRP (fiberglass).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
1,172.15 € 1172.15 EUR
RDWI 14 iron and hydrogen sulphide removal filter
RDWI 14 is an automatic water filtration machine with one filtration column. It provides efficient water purification from iron, manganese and hydrogen sulphide, while the automatic control unit controls the filtration and regeneration process without constant user involvement. The main operating parameters of the system are programmed in the factory, and only the actual time needs to be set before operation.

Why choose RDWI?
🔹 Reduces iron content in water. Helps eliminate rust deposits and yellow stains on plumbing.
🔹 Reduces manganese content. Helps to improve water quality and reduce the formation of dark deposits.
🔹 Reduces hydrogen sulfide. Reduces unpleasant water odor.
🔹 Fully automatic operation. The automatic Clack control unit controls the filtration and regeneration processes.
🔹 Effective and reliable filtration. Factory-programmed operating modes ensure simple operation.

Technical Specification:
• Rated output (Qnom): 1.5 m³/h
• Water consumption per rinse: ~200 litres
• Minimum rinsing intensity: 3.0 m³/h
• Dimensions (Length × Width × Height): 1370 × 370 × 1870 mm
• Tank size: 14" × 0.37m
• Hopper capacity: 145 litres
• Filter media volume: 97 litres
• Dimensions of connections: Sewage 1”-1¼”/1”-1¼”/¾”

General technical parameters:
• Cleaning capabilities: reduces iron, manganese, turbidity, unpleasant odours and discolouration.
• Filter media: MANGANOX, quartz sand 0.4 × 0.8 mm, 0.7 × 1.25 mm, 1 × 3 mm, 3 × 5 mm.
• Tank material: FRP (fiberglass).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
0.0 EUR
RDWI 16 iron and hydrogen sulphide removal filter
RDWI 16 is an automatic water filtration machine with one filtration column. It provides efficient water purification from iron, manganese and hydrogen sulphide, while the automatic control unit controls the filtration and regeneration process without constant user involvement. The main operating parameters of the system are programmed in the factory, and only the actual time needs to be set before operation.

Why choose RDWI?
🔹 Reduces iron content in water. Helps eliminate rust deposits and yellow stains on plumbing.
🔹 Reduces manganese content. Helps to improve water quality and reduce the formation of dark deposits.
🔹 Reduces hydrogen sulfide. Reduces unpleasant water odor.
🔹 Fully automatic operation. The automatic Clack control unit controls the filtration and regeneration processes.
🔹 Effective and reliable filtration. Factory-programmed operating modes ensure simple operation.

Technical Specification:
• Rated output (Qnom): 1.8 m³/h
• Water consumption per rinse: ~240 litres
• Minimum rinsing intensity: 3.6 m³/h
• Dimensions (Length × Width × Height): 1530 × 410 × 2040 mm
• Tank size: 16" × 0.41m
• Hopper capacity: 183 litres
• Filter media volume: 122 litres
• Dimensions of connections: Sewage 1”-1¼”/1”-1¼”/¾”

General technical parameters:
• Cleaning capabilities: reduces iron, manganese, turbidity, unpleasant odours and discolouration.
• Filter media: MANGANOX, quartz sand 0.4 × 0.8 mm, 0.7 × 1.25 mm, 1 × 3 mm, 3 × 5 mm.
• Tank material: FRP (fiberglass).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
0.0 EUR
RDWI 10 X2 iron and hydrogen sulphide removal filter
RDWI series automatic water filtration equipment is designed for iron, manganese and hydrogen sulfide reduction by aeration and catalytic filtration technology. The systems operate fully automatically, ensuring efficient water treatment and simple daily operation.

RDWI 10 X2 is a water filtration system with two filtration columns, designed for facilities with higher water consumption. The two-column operation principle ensures continuous water purification – while one column performs regeneration, the other continues to filter the water.

Why choose RDWI X2?
🔹 Continuous water supply. Two filtration columns ensure water purification even during the regeneration of one column.
🔹 Reduces iron content in water. Helps eliminate rust deposits and yellow stains on plumbing.
🔹 Reduces manganese content. Helps to improve water quality and reduce the formation of dark deposits.
🔹 Reduces hydrogen sulfide. Reduces unpleasant water odor.
🔹 Fully automatic operation. The automatic Clack control unit controls the filtration and regeneration processes.
🔹 Effective and reliable filtration. Factory-programmed operating modes ensure simple operation.

Technical Specification:
• Rated output (Qnom): 1.6 m³/h
• Water consumption per rinse: ~110 litres
• Minimum rinsing intensity: 1.6 m³/h
• Dimensions (Length × Width × Height): 1060 × 250 × 1530 mm
• Tank size: 10" × 0.25m
• Hopper capacity: 64 litres
• Filter media volume: 43 litres
• Connection dimensions: Inlet 1", Outlet 1", Drain ¾"

General technical parameters:
• Cleaning capabilities: reduces iron, manganese, turbidity, unpleasant odours and discolouration.
• Filter material: MANGANOX and quartz sand (0.4–0.8 mm, 0.7–1.25 mm, 1×3 mm, 3–5 mm).
• Tank material: FRP (fiberglass).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
0.0 EUR
RDWI 12 X2 iron and hydrogen sulphide removal filter
RDWI series automatic water filtration equipment is designed for iron, manganese and hydrogen sulfide reduction by aeration and catalytic filtration technology. The systems operate fully automatically, ensuring efficient water treatment and simple daily operation.

RDWI 12 X2 is a water filtration system with two filtration columns, designed for facilities with higher water consumption. The two-column operation principle ensures continuous water purification – while one column performs regeneration, the other continues to filter the water.

Why choose RDWI X2?
🔹 Continuous water supply. Two filtration columns ensure water purification even during the regeneration of one column.
🔹 Reduces iron content in water. Helps eliminate rust deposits and yellow stains on plumbing.
🔹 Reduces manganese content. Helps to improve water quality and reduce the formation of dark deposits.
🔹 Reduces hydrogen sulfide. Reduces unpleasant water odor.
🔹 Fully automatic operation. The automatic Clack control unit controls the filtration and regeneration processes.
🔹 Effective and reliable filtration. Factory-programmed operating modes ensure simple operation.

Technical Specification:
• Rated output (Qnom): 2.0 m³/h
• Water consumption per rinse: ~130 litres
• Minimum rinsing intensity: 2.0 m³/h
• Dimensions (Length × Width × Height): 1210 × 300 × 1480 mm
• Tank size: 12" × 0.30m
• Hopper capacity: 85 litres
• Filter media volume: 57 litres
• Connection dimensions: Inlet 1", Outlet 1", Drain ¾"

General technical parameters:
• Cleaning capabilities: reduces iron, manganese, turbidity, unpleasant odours and discolouration.
• Filter material: MANGANOX and quartz sand (0.4–0.8 mm, 0.7–1.25 mm, 1×3 mm, 3–5 mm).
• Tank material: FRP (fiberglass).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
0.0 EUR
RDWI 13 X2 iron and hydrogen sulphide removal filter
RDWI series automatic water filtration equipment is designed for iron, manganese and hydrogen sulfide reduction by aeration and catalytic filtration technology. The systems operate fully automatically, ensuring efficient water treatment and simple daily operation.

RDWI 13 X2 is a water filtration system with two filtration columns, designed for facilities with higher water consumption. The two-column operation principle ensures continuous water purification – while one column performs regeneration, the other continues to filter the water.

Why choose RDWI X2?
🔹 Continuous water supply. Two filtration columns ensure water purification even during the regeneration of one column.
🔹 Reduces iron content in water. Helps eliminate rust deposits and yellow stains on plumbing.
🔹 Reduces manganese content. Helps to improve water quality and reduce the formation of dark deposits.
🔹 Reduces hydrogen sulfide. Reduces unpleasant water odor.
🔹 Fully automatic operation. The automatic Clack control unit controls the filtration and regeneration processes.
🔹 Effective and reliable filtration. Factory-programmed operating modes ensure simple operation.

Technical Specification:
• Rated output (Qnom): 2.0 m³/h
• Water consumption per rinse: ~170 litres
• Minimum rinsing intensity: 2.6 m³/h
• Dimensions (Length × Width × Height): 1290 × 330 × 1530 mm
• Tank size: 13" × 0.33m
• Hopper capacity: 110 litres
• Filter media volume: 73 litres
• Connection dimensions: Inlet 1", Outlet 1", Drain ¾"

General technical parameters:
• Cleaning capabilities: reduces iron, manganese, turbidity, unpleasant odours and discolouration.
• Filter material: MANGANOX and quartz sand (0.4–0.8 mm, 0.7–1.25 mm, 1×3 mm, 3–5 mm).
• Tank material: FRP (fiberglass).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
0.0 EUR
RDWI 14 X2 iron and hydrogen sulphide removal filter
RDWI series automatic water filtration equipment is designed for iron, manganese and hydrogen sulfide reduction by aeration and catalytic filtration technology. The systems operate fully automatically, ensuring efficient water treatment and simple daily operation.

RDWI 14 X2 is a water filtration system with two filtration columns, designed for facilities with higher water consumption. The two-column operation principle ensures continuous water purification – while one column performs regeneration, the other continues to filter the water.

Why choose RDWI X2?
🔹 Continuous water supply. Two filtration columns ensure water purification even during the regeneration of one column.
🔹 Reduces iron content in water. Helps eliminate rust deposits and yellow stains on plumbing.
🔹 Reduces manganese content. Helps to improve water quality and reduce the formation of dark deposits.
🔹 Reduces hydrogen sulfide. Reduces unpleasant water odor.
🔹 Fully automatic operation. The automatic Clack control unit controls the filtration and regeneration processes.
🔹 Effective and reliable filtration. Factory-programmed operating modes ensure simple operation.

Technical Specification:
• Rated output (Qnom): 3.0 m³/h
• Water consumption per rinse: ~200 litres
• Minimum rinsing intensity: 3.0 m³/h
• Dimensions (Length × Width × Height): 1370 × 360 × 1850 mm
• Tank size: 14" × 0.36m
• Hopper capacity: 145 litres
• Filter media volume: 97 litres
• Connection dimensions: Inlet 1”-1¼”, Outlet 1”-1¼”, Sewer ¾"

General technical parameters:
• Cleaning capabilities: reduces iron, manganese, turbidity, unpleasant odours and discolouration.
• Filter material: MANGANOX and quartz sand (0.4–0.8 mm, 0.7–1.25 mm, 1×3 mm, 3–5 mm).
• Tank material: FRP (fiberglass).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
0.0 EUR
RDWI 16 X2 iron and hydrogen sulphide removal filter
RDWI series automatic water filtration equipment is designed for iron, manganese and hydrogen sulfide reduction by aeration and catalytic filtration technology. The systems operate fully automatically, ensuring efficient water treatment and simple daily operation.

RDWI 16 X2 is a water filtration system with two filtration columns, designed for facilities with higher water consumption. The two-column operation principle ensures continuous water purification – while one column performs regeneration, the other continues to filter the water.

Why choose RDWI X2?
🔹 Continuous water supply. Two filtration columns ensure water purification even during the regeneration of one column.
🔹 Reduces iron content in water. Helps eliminate rust deposits and yellow stains on plumbing.
🔹 Reduces manganese content. Helps to improve water quality and reduce the formation of dark deposits.
🔹 Reduces hydrogen sulfide. Reduces unpleasant water odor.
🔹 Fully automatic operation. The automatic Clack control unit controls the filtration and regeneration processes.
🔹 Effective and reliable filtration. Factory-programmed operating modes ensure simple operation.

Technical Specification:
• Rated output (Qnom): 3.6 m³/h
• Water consumption per rinse: ~240 litres
• Minimum rinsing intensity: 3.6 m³/h
• Dimensions (Length × Width × Height): 1530 × 410 × 1870 mm
• Tank size: 16" × 0.41m
• Hopper capacity: 183 litres
• Filter media volume: 122 litres
• Connection dimensions: Inlet 1”-1¼”, Outlet 1”-1¼”, Sewer ¾"

General technical parameters:
• Cleaning capabilities: reduces iron, manganese, turbidity, unpleasant odours and discolouration.
• Filter material: MANGANOX and quartz sand (0.4–0.8 mm, 0.7–1.25 mm, 1×3 mm, 3–5 mm).
• Tank material: FRP (fiberglass).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
0.0 EUR
RDWI 18 X2 iron and hydrogen sulphide removal filter
RDWI series automatic water filtration equipment is designed for iron, manganese and hydrogen sulfide reduction by aeration and catalytic filtration technology. The systems operate fully automatically, ensuring efficient water treatment and simple daily operation.

RDWI 18 X2 is a water filtration system with two filtration columns, designed for facilities with higher water consumption. The two-column operation principle ensures continuous water purification – while one column performs regeneration, the other continues to filter the water.

Why choose RDWI X2?
🔹 Continuous water supply. Two filtration columns ensure water purification even during the regeneration of one column.
🔹 Reduces iron content in water. Helps eliminate rust deposits and yellow stains on plumbing.
🔹 Reduces manganese content. Helps to improve water quality and reduce the formation of dark deposits.
🔹 Reduces hydrogen sulfide. Reduces unpleasant water odor.
🔹 Fully automatic operation. The automatic Clack control unit controls the filtration and regeneration processes.
🔹 Effective and reliable filtration. Factory-programmed operating modes ensure simple operation.

Technical Specification:
• Rated output (Qnom): 4.0 m³/h
• Water consumption per rinse: ~270 litres
• Minimum rinsing intensity: 4.0 m³/h
• Dimensions (Length × Width × Height): 1680 × 460 × 1870 mm
• Tank size: 18" × 0.46m
• Hopper capacity: 237 litres
• Filter media volume: 158 litres
• Connection dimensions: Inlet 1¼”, Outlet 1¼”, Sewer 1”

General technical parameters:
• Cleaning capabilities: reduces iron, manganese, turbidity, unpleasant odours and discolouration.
• Filter material: MANGANOX and quartz sand (0.4–0.8 mm, 0.7–1.25 mm, 1×3 mm, 3–5 mm).
• Tank material: FRP (fiberglass).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
0.0 EUR

Drinking Water Filters