Clack WS2 EI Regenerating - Time (Softener KMnO) Control unit
Valve Clack WS 2 "EI is the analogue of Fleck 3150 and has high performance. It is equipped with an EI controller that can program all regeneration stages. The variant of the softener valve is equipped with a counter for the water flowing through the valve. The regeneration output of softeners, usually with a flow meter, filters - according to the timer. The valve socket diameter is 4 ". The diameter of the plug connector is 2 ". The location of the valve on the filter housing is the highest. Installation with Clack WS 2" EI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.
Manufacturer: Clack Corporation
Model: Clack WS 2 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of housings, inches 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg