• Control unit spare parts
  • CLACK control unit accessories
  • CLACK control units
"Clack" control valve WS1.5 EI Regenerating - Meter (Softener KMnO)
Clack WS 1,5 "EI control valve - automatic equipment for filters with 1,5" connection diameter. Diameter under the water pipe - 2 ". Landing thread - 4". It is supplied in two modifications: DM - reagent, BTZ - without reagents. The reagent valve Clack WS 1,5 "EI (V15EI-DM) has a 1/2" reagent line for adding salt-solvent tank, and is equipped with a counter for measuring purified water. Possible reagent flow up and down during washing. Clack WS 1,5 "EI (V15EI-BTZ) reagent-free valve is three-cycle (default), and is used for the use of separators, clarification devices and collection filters. This valve is equipped with a five-button (step) CI card with the maximum number of settings. It is possible to flush immediately. , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 1,5/1,5 female round NPT
Sewer diameter, inches: 1,25 ”NPT with 3/4” standard NPT, 1 ”NPT optional
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 191
Range of applications, inches: 12-30 - softening
12-30 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 9,3 kg
1,299.00 € 1299.0 EUR
"Clack" control valve WS1.5 EI Regenerating - Time (Softener KMnO)
Clack WS 1,5 "EI control valve - automatic equipment for filters with 1,5" connection diameter. Diameter under the water pipe - 2 ". Landing thread - 4". It is supplied in two modifications: DM - reagent, BTZ - without reagents. The reagent valve Clack WS 1,5 "EI (V15EI-DM) has a 1/2" reagent line for adding salt-solvent tank, and is equipped with a counter for measuring purified water. Possible reagent flow up and down during washing. Clack WS 1,5 "EI (V15EI-BTZ) reagent-free valve is three-cycle (default), and is used for the use of separators, clarification devices and collection filters. This valve is equipped with a five-button (step) CI card with the maximum number of settings. It is possible to flush immediately. , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 1,5/1,5 female round NPT
Sewer diameter, inches: 1,25 ”NPT with 3/4” standard NPT, 1 ”NPT optional
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 191
Range of applications, inches: 12-30 - softening
12-30 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 9,3 kg
970.00 € 970.0 EUR
"Clack" control valve WS1.5 TC Filter (Backwash only)
Clack WS 1.5 TC control valve is used to regulate and control the sorption cleaning, delay, manganese and nitrate removal in charged water filters.

Pipe Connection Size (Inlet/Outlet): 1½ inches
Drain connection size: 1¼ inches
Number of regeneration cycles: up to 6
Mounting base: 4 inches
Working pressure: 1,4-8,6 atm.

Operating temperature: 4-43 °C
Power supply voltage of adapters: 220 V, 50 Hz
Control box supply voltage: 12 V
Power Consumption: 500 mA
850.00 € 850.0 EUR
WS2 CI Filter - Meter (Backwash only) Control unit
Clack WS 2 "CI valve is the analogue of Fleck 3150 and has high performance. It is equipped with a CI controller in which all regeneration stages can be programmed. The variant of the softener valve is equipped with a counter for the water discharged through the valve. The regeneration output of softeners occurs through the flow meter, filters - on the timer. The diameter of the valve landing thread - 4 ". The diameter of the plug connector is 2 ". The valve location in the filter housing is the highest. Installation with Clack WS 2" CI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.

Manufacturer: Clack Corporation
Model: Clack WS 2 CI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: CI (electronic, up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of applications, inches: 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg
1,799.00 € 1799.0 EUR
Clack WS2 CI Regenerating - Meter (Softener KMnO) Control unit
Clack WS 2 "CI valve is the analogue of Fleck 3150 and has high performance. It is equipped with a CI controller in which all regeneration stages can be programmed. The variant of the softener valve is equipped with a counter for the water discharged through the valve. The regeneration output of softeners occurs through the flow meter, filters - on the timer. The diameter of the valve landing thread - 4 ". The diameter of the plug connector is 2 ". The valve location in the filter housing is the highest. Installation with Clack WS 2" CI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.

Manufacturer: Clack Corporation
Model: Clack WS 2 CI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: CI (electronic, up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of applications, inches: 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg
2,150.00 € 2150.0 EUR
Clack WS2 CI Regenerating - Time (Backwash only) Control unit
Clack WS 2 "CI valve is the analogue of Fleck 3150 and has high performance. It is equipped with a CI controller in which all regeneration stages can be programmed. The variant of the softener valve is equipped with a counter for the water discharged through the valve. The regeneration output of softeners occurs through the flow meter, filters - on the timer. The diameter of the valve landing thread - 4 ". The diameter of the plug connector is 2 ". The valve location in the filter housing is the highest. Installation with Clack WS 2" CI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.

Manufacturer: Clack Corporation
Model: Clack WS 2 CI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: CI (electronic, up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of applications, inches: 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg
1,315.00 € 1315.0 EUR
Clack WS2 CI Regenerating - Time (Softener KMnO) Control unit
Clack WS 2 "CI valve is the analogue of Fleck 3150 and has high performance. It is equipped with a CI controller in which all regeneration stages can be programmed. The variant of the softener valve is equipped with a counter for the water discharged through the valve. The regeneration output of softeners occurs through the flow meter, filters - on the timer. The diameter of the valve landing thread - 4 ". The diameter of the plug connector is 2 ". The valve location in the filter housing is the highest. Installation with Clack WS 2" CI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.

Manufacturer: Clack Corporation
Model: Clack WS 2 CI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: CI (electronic, up to 9 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of applications, inches: 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg
1,510.00 € 1510.0 EUR
Clack WS2 EI Filter - Meter (Backwash only) Control unit
Valve Clack WS 2 "EI is the analogue of Fleck 3150 and has high performance. It is equipped with an EI controller that can program all regeneration stages. The variant of the softener valve is equipped with a counter for the water flowing through the valve. The regeneration output of softeners, usually with a flow meter, filters - according to the timer. The valve socket diameter is 4 ". The diameter of the plug connector is 2 ". The location of the valve on the filter housing is the highest. Installation with Clack WS 2" EI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.

Manufacturer: Clack Corporation
Model: Clack WS 2 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of housings, inches 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg
1,990.00 € 1990.0 EUR
Clack WS2 EI Filter - Time (Backwash only) Control unit
Valve Clack WS 2 "EI is the analogue of Fleck 3150 and has high performance. It is equipped with an EI controller that can program all regeneration stages. The variant of the softener valve is equipped with a counter for the water flowing through the valve. The regeneration output of softeners, usually with a flow meter, filters - according to the timer. The valve socket diameter is 4 ". The diameter of the plug connector is 2 ". The location of the valve on the filter housing is the highest. Installation with Clack WS 2" EI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.

Manufacturer: Clack Corporation
Model: Clack WS 2 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of housings, inches 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg
1,800.00 € 1800.0 EUR
Clack WS2 EI Regenerating - Meter (Softener KMnO) Control unit
Valve Clack WS 2 "EI is the analogue of Fleck 3150 and has high performance. It is equipped with an EI controller that can program all regeneration stages. The variant of the softener valve is equipped with a counter for the water flowing through the valve. The regeneration output of softeners, usually with a flow meter, filters - according to the timer. The valve socket diameter is 4 ". The diameter of the plug connector is 2 ". The location of the valve on the filter housing is the highest. Installation with Clack WS 2" EI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.

Manufacturer: Clack Corporation
Model: Clack WS 2 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of housings, inches 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg
1,990.00 € 1990.0 EUR
Clack WS2 EI Regenerating - Time (Softener KMnO) Control unit
Valve Clack WS 2 "EI is the analogue of Fleck 3150 and has high performance. It is equipped with an EI controller that can program all regeneration stages. The variant of the softener valve is equipped with a counter for the water flowing through the valve. The regeneration output of softeners, usually with a flow meter, filters - according to the timer. The valve socket diameter is 4 ". The diameter of the plug connector is 2 ". The location of the valve on the filter housing is the highest. Installation with Clack WS 2" EI valve is in principle periodic. It is possible to combine the controllers with each other to provide the consumer with continuous water supply.

Manufacturer: Clack Corporation
Model: Clack WS 2 EI
Body material: Lead free brass/bronze
Connection diameter (inlet/outlet), inches: 2/2 (internal NPT)
Drain diameter, inches: 1,5 female round NPT
Water pipe diameter, inches: 1,90 ”O.D.Pipe, 1,5” NPS
Landing thread diameter, inches: 4 "
Rated water consumption, m3 / h: 15,8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (electronic, up to 6 regeneration stages)
Memory type: Non-volatile (EEROM, Electronically Erasable Read-Only Memory)
Reagent resistance: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Height of the housing from the top of the filter housing, mm: 190,5
Range of housings, inches 12-48 - softening
12-36 - filtering
Power supply characteristics, V/Hz: 220/50
Operating temperature, degrees Celsius: 4–43
Operating pressure, bar: 1,4–8,27
Weight of the control valve, kg: 12,8 kg
1,800.00 € 1800.0 EUR
''Clack'' control valve WS1EI BACKWASH ONLY FILTER METERED CONTROL VALVE
The front panel display shows the time of day, days until the next regeneration.
The dual-wash function ensures optimal regeneration, cleaning performance and efficiency.
8 hour coin cell backup battery.
Automatic line frequency detection 50/60 Hz with automatic format maintenance 12/24 hours.
The 12 volt AC adapter ensures safe and convenient installation.



Supply Voltage: 230 V AC
Supply Frequency: 50 Hz
Output Voltage: 12 V AC
Output Current: 500 mA
319.00 € 319.0 EUR
"Clack" control valve WS1EI DOWNFLOW REGENERATION METERED CONTROL VALVES
The front panel display shows the time of day, days until the next regeneration.
The dual-wash function ensures optimal regeneration, cleaning performance and efficiency.
8 hour coin cell backup battery.
Automatic line frequency detection 50/60 Hz with automatic format maintenance 12/24 hours.
The 12 volt AC adapter ensures safe and convenient installation.



Supply Voltage: 230 V AC
Supply Frequency: 50 Hz
Output Voltage: 12 V AC
Output Current: 500 mA
332.00 € 332.0 EUR
Clack WS1EI TWIN Control Unit
The front panel display shows the time of day, days until the next regeneration.
The dual-wash function ensures optimal regeneration, cleaning performance and efficiency.
8 hour coin cell backup battery.
Automatic line frequency detection 50/60 Hz with automatic format maintenance 12/24 hours.
The 12 volt AC adapter ensures safe and convenient installation.


Supply Voltage: 230 V AC
Supply Frequency: 50 Hz
Output Voltage: 12 V AC
Output Current: 500 mA
655.00 € 655.0 EUR

Drinking Water Filters